CONFLEX Tutorials

Inserting Guest Molecules

CONFLEX can insert guest molecules into a host molecule. There are three ways to specify the insertion position: specifying coordinates directly, specifying a vector and a distance, and specifying a plane and a distance. If no insertion position is specified, the program determines the insertion position automatically. The supported file formats are MOL and MOL2. Here, we use an aniline molecule (aniline.mol) and a water molecule (water.mol) as an example to demonstrate how to insert a guest molecule. Each file is located in the Sample_Files folder within the CONFLEX installation folder (Sample_Files\CONFLEX\insert.guest.molecules).

aniline.mol file

aniline                                                                         
                                                                                
                                                                                
 14 14  0     0               999 V2000
   -0.0000    1.2016    0.2324 C   0  0  0  0  0     
   -0.0000    1.2044   -1.1652 C   0  0  0  0  0     
   -0.0000   -0.0000   -1.8646 C   0  0  0  0  0     
   -0.0000   -1.2044   -1.1652 C   0  0  0  0  0     
   -0.0000   -1.2016    0.2324 C   0  0  0  0  0     
   -0.0000    0.0000    0.9445 C   0  0  0  0  0     
    0.0000   -0.0000    2.3265 N   0  0  0  0  0     
    0.0000    2.1503    0.7616 H   0  0  0  0  0     
    0.0000    2.1475   -1.7049 H   0  0  0  0  0     
   -0.0000    0.0000   -2.9511 H   0  0  0  0  0     
    0.0000   -2.1475   -1.7049 H   0  0  0  0  0     
    0.0000   -2.1503    0.7616 H   0  0  0  0  0     
   -0.0000    0.8692    2.8408 H   0  0  0  0  0     
   -0.0000   -0.8692    2.8408 H   0  0  0  0  0     
  1  2  2  0     0
  6  1  1  0     0
  1  8  1  0     0
  2  3  1  0     0
  2  9  1  0     0
  3  4  2  0     0
  3 10  1  0     0
  4  5  1  0     0
  4 11  1  0     0
  5  6  2  0     0
  5 12  1  0     0
  6  7  1  0     0
  7 13  1  0     0
  7 14  1  0     0
M  END

water.mol file

water                                                                           
                                                                                
                                                                                
  3  2  0     0               999 V2000
   -0.0000    0.7635    0.5299 H   0  0  0  0  0     
   -0.0000    0.0000   -0.0668 O   0  0  0  0  0     
    0.0000   -0.7635    0.5299 H   0  0  0  0  0     
  1  2  1  0     0
  2  3  1  0     0
M  END

[Insertion Method]

[Running from the Interface]

Open the aniline.mol file using the CONFLEX Interface.

Interface Open

From the Calculation menu, select "CONFLEX", and in the calculation settings dialog that opens, click Detail Settings.
Next, under "General Settings" in the detailed settings dialog, click Add in the "Insert Guest Molecules" section and select the guest molecule file to add. To add multiple guest molecules, repeat this operation.

General Settings

[Running from the command line]

Specify the host molecule with the -host option and the guest molecule with the -guest option, then run the program. To add multiple guest molecules, specify each one with its own -guest option.

C:\CONFLEX\bin\conflex-10b.exe   -par   C:\CONFLEX\par   -host   aniline.mol   -guest   water.molenter

The above is for Windows. For the run commands on other operating systems, see "How to Run" in this manual.

The insertion position can be specified in the following ways:

[Placement by Specifying Coordinates]

One way to specify the position of the guest molecule to insert is to specify its coordinates directly.

Here, relative to the host molecule aniline, we place the water molecule so that the centroid of the guest water molecule is located at the coordinates (0.0, 5.0, 0.0) (see the figure below).

Insert Guest Default

To do this, use the following keyword.

GUEST=(1,CENTROID,0.0,5.0,0.0) 

The parameters of the GUEST keyword are described below.

Value Description
1 The first guest molecule specified
CENTROID Use the centroid of the guest molecule as the reference point for placement
0.0,5.0,0.0 Target coordinates for placement

For details on the keyword, refer to the manual.

When running from the Interface, click Edit & Submit in the detailed settings dialog and add the keyword in the dialog that appears. When running from the command line, write the keyword in the aniline.ini file.

[Placement by Specifying a Vector and Distance]

One way to specify the position of the guest molecule to insert is to specify a vector and distance.

Here, relative to the host molecule aniline, we place the water molecule so that the centroid of the guest water molecule lies along the vector pointing from atom 6 to atom 7 of the host molecule, at a distance of 5 Å from atom 7 as the starting point (see the figure below).

Insert Guest Default

To do this, use the following keyword.

GUEST_ALONG_VECTOR=(1,CENTROID,6,7,5.0) 

The parameters of the GUEST_ALONG_VECTOR keyword are described below.

Value Description
1 The first guest molecule specified
CENTROID Use the centroid of the guest molecule as the reference point for placement
6 The serial number of the host-molecule atom that is the start point of the direction vector
7 The serial number of the host-molecule atom that is the end point of the direction vector
5.0 The distance to move along the vector direction, starting from the end point (atom 7)

For details on the keyword, refer to the manual.

When running from the Interface, click Edit & Submit in the detailed settings dialog and add the keyword in the dialog that appears. When running from the command line, write the keyword in the aniline.ini file.

[Placement by Specifying a Plane and Distance]

One way to specify the position of the guest molecule to insert is to specify a plane and distance.

Here, relative to the host molecule aniline, we place the water molecule so that the centroid of the guest water molecule is located 5 Å along the normal direction, starting from the center of the plane formed by atoms 1, 3, and 5 of the host molecule (see the figure below).

Insert Guest Default

To do this, use the following keyword.

GUEST_PLANE_NORMAL=(1,CENTROID,1,3,5,5.0,CENTROID) 

The parameters of the GUEST_PLANE_NORMAL keyword are described below.

Value Description
1 The first guest molecule specified
CENTROID Use the centroid of the guest molecule as the reference point for placement
1,3,5 The serial numbers of the three host-molecule atoms that define the plane
5.0 The distance to move along the normal direction of the plane
CENTROID Use the center of the plane formed by atoms 1, 3, and 5 as the starting point of the movement

For details on the keyword, refer to the manual.

When running from the Interface, click Edit & Submit in the detailed settings dialog and add the keyword in the dialog that appears. When running from the command line, write the keyword in the aniline.ini file.

[When No Insertion Position Is Specified]

If no insertion position is specified, guest molecules are placed in the following order relative to the center of the host molecule: +x, −x, +y, −y, +z, −z. The first guest molecule is placed in the +x direction (see the figure below).

Insert Guest Default